Introducing the British Infantry

Latest edit: Speira British Support Troops at the bottom of the post

______________

This post is a consolidation of the four British Infantry posts that I had to split because of the blogger limitations regarding labels. Now that I have simplified my labeling strategy, I was able to combine them into a single one. It probably needs a bit more editing, but at least for now it provides a central location to see all the British Infantry figures made by all manufacturers.

Here is a peek into what I am currently working on. It is a painted set of 50 British Infantry figures. As you might recall, I like to keep the poses unique and sometimes not all the poses from a given manufacturer 'make the cut' as far as the quality of the sculpting. You might also notice that I am only painting 50 figures instead of 100 as I did with some of the other sets. This is partly due to time constraints, partly because there aren't that many unique poses for this country/branch of the military, and partly because playing a war-game with 100 figures + vehicles, tends to take quite a bit of time, so 50 seems a good number. Another thing to note is that this is an expansion from about 12 figures that I had originally painted about 10 years back, and therefore you might see some of them at different stages of painting. As far as when they will be done, I am not sure as lately I have been doing a lot more blogging and a lot less painting, but eventually you will be able to see the finished product. Alright, so let's get to it.

Airfix British Infantry

Except for the guy who is standing firing, these poses are very dynamic. One of my favorite sets. They are also among the original squad that I had painted a few years back. That was before I learned how to give them their protective coats, so over the years they got chipped and needed a touch-up. You might also notice a glossy finish which I don't really like. By the time I am done, it will be gone. The other thing that will change is that originally all the webbing for their equipment was beige, but I later noticed that British Infantry also had green webbing, so I decided to switch to that color.

Airfix British Infantry Heavy Weapons Set

As you can see, only a subset of the figures are represented here.

Atlantic British Infantry

There are 10 figures in the original set, but some of them are a bit stiff, and some of them, like the guy carrying his wounded buddy shown in a post a couple of weeks back, are not really action poses that lend themselves to a table-top war-game.

BMC British Infantry

To be more precise, these guys are British 8th Army Infantry, but they round up the 50 figures well. Their sculpting seems nicer than that of the other figures from the other sets that did not make the cut.

Britains Herald British Infantry - Part I

Based on the weapons they are carrying these guys seem to be post-WWII figures, but their poses are nice enough that I couldn't resist being a purist and I drafted them into the WWII Army. 

Britains Herald British Infantry - Part II

Britain's Herald figures were produced from the 1950's to the 1980's, some of the later ones made in Hong Kong. You can tell some of the newer ones from the base which is not part of the figure but attached to it.

Marx British Infantry

A classic set. A bit slim for my taste, but nonetheless a nice addition to the unit.

Matchbox British Infantry - Part I

The Bren gunner is one of my favorite ones. For some reason the flamethrower guy tends to be harder to find than the rest.

Matchbox British Infantry - Part II

The officer with the sheepskin coat is turning out nicely.

Weston British Infantry

New production by Steve Weston. Overall a nicely sculpted set. The only thing to criticize is how wide the helmets are. Some of them remind me of the helmets used by the Star Wars men protecting the Emperor.

Finished British Infantry

This is how the whole unit looks after I finished painting them and gave them their protective coats.

In the previous pictures I showed all the British Infantry poses that I was in the process of painting. That post left out some poses that I decided not to paint. At the time I was aiming to paint 50 different guys with the goal of using them for war-gaming, so I left out the poses that were least appealing and those that were the least useful in a war-game. Then there are also a couple figures that I have managed to find after I finished painting that batch. Since I would like this blog to be as complete as possible and serve as a catalog organized by manufacturer I feel the need to remedy this. So here are the British Infantry soldiers who did not make the 'paint cut'. 

Airfix British Infantry Support Group

The 5 guys on the right are from the original set. The radio man on the left is a paratrooper, but it came with the set of recasts that I bought a few years back. Since I had already painted him with the paratroopers, I left him out of the British Infantry selection. The other guys are mostly standing around and I wanted action poses. The right-most guy needs a gun or a mortar to go along so I also cut him. And the prone guy is supposed to be feeding ammo to the Vickers MG (not shown here) but I already had enough prone guys, so he made room for other action poses.

Atlantic British Infantry - Part 1

I have very mixed feelings about these guys. Some of them are nice and some of them are really bad. The man helping his mate is a very good pose. Similar to a Marx 'Battleground' GI. But the other two miss the mark when it comes to realism. The one on the right seems to be picking an apple from a tree, when in reality he is supposed to be throwing a grenade. The one on the left seems to be waving at his friends... not a battlefield pose.

Atlantic British Infantry - Part 2

Again, a mixed lot. The commander is good. I would have painted him if I had not had enough officers already in my selection. The other two prone guys were easy choices to cut. The one on the left seems to be doing push ups, and the other one comes with a detached Bren gun which you would actually expect him to be holding with both hands.

BMC British Infantry

Compared to BMC's Germans and Americans, the British are actually fairly decent. In this case, I wouldn't say that I cut them, but instead I chose to paint them with the British 8th Army instead. But I did let them contribute two poses to the batch of 50 that I painted.

Britains Herald British Infantry - Part I

The Britains Herald poses are fairly good in general. They represent post-war figures, but they still come in very nice poses. I ended up painting 10 of them. The mine sweeper guy did not get painted because I got him after I was done painting the other guys. The marching guy was eliminated because I wanted more active poses. The rest of the Herald British Infantry poses are in this other post.

Britains Herald British Infantry - Part II

This guy is more like a 50mm figure than 1/32. From what I understand he was designed and manufactured as a test product -and just this single pose- when Britains was evaluating getting into the plastic market. In case of a failed experiment, they were going to be sold to the tourist market, hence the ceremonial stance. 

The following guys are all factory painted or were found after I described the British figures above. In addition to the guys below, 21st Century Toys also produced 6 factory-painted British Infantry, but I did not get around to buying those. Now that I am posting pictures of the figures, I wish I had. Maybe I will look for them on eBay at some point. Anyhow, let's take a look at the ones I do have.

Britains Deetail British Infantry

These are vintage figures from the 70's and 80's. A nice set all around. All small arms are represented. It's nice how they all have bits of cammo attached to their helmets.

First Gear British Infantry

These are recasts of the original Britains Deetail figures produced in the last few years. I find the color scheme better than the original, but I don't like how they paint the eyes that much. Note also that the bases have rounded corners, not that it makes a big difference.

Britains Deetail British Mortar Set

A really nice heavy mortar team. The mortar can actually fire shells enabled by a spring mechanism inside the tube. There is a small lever in the back of the mortar which can be pulled and released to eject the shells. A pretty fun set.

Britains Deetail British Assault Boat

An officer and a Bren gunner on a raft. A tricky set to find a realistic setting for, but like the saying goes, 'that's a good problem to have' when it comes to the coolness factor of this set.

Britains Deetail British Land Rover

This is a nice little set from Britains Deetail. The Rover comes with a driver and a Bren gunner in the back. I would have rather had it in a tan color scheme to use it for some long range patrols in the desert, but hey, we can still send this guy to scout the French countryside.

Britains Deetail British Land Rover - other side

From this angle you can see the Bren gunner better. Notice how his knee is resting on a little ledge behind the cabin so that he can lean forward and rest the gun on the top of the vehicle while he fires away. I find that a nice touch of realism. 

Crescent British Infantry

Based on the weapons, these guys seem to be modern British Infantry. They are a bit on the smaller side of the scale, but I think that once they are painted they will fight just fin. I particularly like the two guys on the right. Their forward lean makes them good action poses.

Crescent 60mm British Infantry - Part I

Crescent also produced 60mm British Infantry figures. Naturally they look a bit large next to the rest of the guys, but if you spread them out, they could just be a big guy among the rest of the normal size crowd.

Crescent 60 mm British Infantry - Part II

The officer. A nice action pose. Running into the heat of battle.

Britains Swoppets British Infantry

I only have a handful of these guys, but this sample is quite nice. The mortar team is very well put together. Unfortunately the man dropping the shell into the tube is missing the shell, but if you assume that he just dropped it, then it works just fine. The stretcher guys unfortunately are also missing the stretcher, so I had to place the wounded man on the ground. I guess that's the downside of the swoppet approach. Those detachable pieces go missing. Note that the wounded guy comes with a blanket, which gives it an additional nice touch.

Britains Swoppets British Infantry - Part II

A couple more guys. The marching guy is nothing out of the ordinary. The other guy is showing quite a bit more action. Definitely more into the heat of the moment. 

Britains Swoppets British Infantry - Part III

This guy came to me already in a pretty beaten up shape. Looks like the previous owner wanted some casualties in his army and even painted some blood stains on this poor fellow. I wish they had kept him in his original shape...

Britains Swoppets British Infantry - Part IV

This guy seems to have the same lower body as the previous guy. although he seems to have lost his base, but that's OK. He does not really need it. The upper body is very much to my liking and his weapon is in great shape. I think he is one of my favorite swoppet figures across all swoppet manufacturers. 

Timpo Swoppets British Infantry - Part I

Here are a couple of the figures in the regular British infantry set. They seem more dynamic and better posed than their German or US counterparts. I particularly like the man charging with the bayonet. The officer is also nicely done, including his revolver. Hopefully I can get my hands on the rest of the set at some point. 

Timpo Swoppets British Infantry - Part II

Here is another guy from the Timpo Swoppets set. The top combines nicely with the legs giving it a very dynamic stance. He is holding a revolver on one hand and a grenade on the other. Note also that the base if a different color than the two in the previous picture.

Timpo Swoppets British Infantry with raft

Here is a rather nice and interesting set from Timpo. It is a set of British Infantry advancing on a raft. Sometimes such rafts feel quite a bit underscale, but in this case, both the figures and the raft are well proportioned. Two of the poses seem to be repeated, and I don't know if that was the case with the original set, but I am still quite happy having found it in this good condition.

Hilco British (or US?) Infantry - Part I

These are only three poses from the set. I've seen another 4 or 5 guys. I am not sure how many there are in all. The figures are a bit on the slim side, and the sculpting is OK, but not extraordinary. Even so, they seem to be a bit hard to get. And for some reason, that piece behind them with the tree stumps seems to be something special as I saw it go for 20+ dollars on eBay. Also, The shape of the helmets makes me doubt whether they are really British Infantry.

Hilco British (or US?) Infantry - Part II

Here are a few more Hilco guys that I recently found. As you can see they are mostly recasts of Britains Herald (grenade thrower, officer), Timpo (minesweeper, radio man), and Crescent (flamethrower) figures. The one sure thing that confirms that they are Hilco figures is that the base is stamped as such. About the country that they represent, I am now wondering if they actually come from two different sets: American and British.

Hilco British (or US?) Infantry - Part III

Another guys based on the Timpo figures. Note how the plastic that this guy is made of also shows those unusual color variations. 

Hilco British Infantry - Part IV

And here is one more guy. This one also seems to be a copy of the Herald British Infantry. The plastic and original paint scheme are different from the figures in the previous pictures, so there must have been several releases of these figures. 

Hilco British Infantry - Part V

And they keep coming in one at a time. From a large lot of mixed figures... Although similar to the Timpo guy, I know it is Hilco due to the stamp on the bottom of the base, and also due to the strange and unique plastic that many of them are cast in. The other sign that this is a Hilco guy is the fact that the base is split into two sections, just as it is for the kneeling radio man. A good heavy weapon to add to the team.

UNA British Infantry

This is a figure from new company that I just discovered. I purchased a lot of mixed soldiers and this one came with it. At first glance it looks like a Lone Star kind of guy, but the bottom part of the base is marked 'UNA' and a few google searches revealed that is an actual toy soldier company. His uniform and Vickers MG lead me to believe that he is a British guy, but I have not confirmed it or found any other UNA Tommies yet. Based on the helmet he might also be a GI as UNA did make a GI set.

Brenbros British Infantry

These are reproductions of the Herald British Infantry. Not much special about them, since they don't even come factory painted as the Herald guys did. 

Blue Box Elite Command British Infantry

This is a set of 4 metal figures representing General Bernard Montgomery and some of his infantrymen. Compared to other metal figures, like King and Country and so on, they are not as nice. In fact, I bought them thinking that they were plastic figures as that is the focus of my collection. As far as the resemblance with Monty, I think it requires a bit of imagination to get there. 

Cherilea Modern British Infantry

I really like the level of action and intensity depicted by these guys. And by that, I don't just mean that they have for instance, a guy who is charging, because some other manufacturers also have such a pose, but still, the movements of those other figures are sometimes not as fluid. They really captured well all the subtle angles of the joints and leaning of the body to give them a very genuine look. There is at least one more guy in the set, as I've seen a picture with 4 poses (a grenade thrower is missing).

Plastic Platoon British Infantry

This set is meant to represent the British defenders of Crete who fought against the German Paras. Again, characteristically well made by Plastic Platoon, with lots of action and intensity. You can tell that these guys were involved in close quarters fighting. Worth highlighting is who I think might the Sarge, holding a pistol on one hand, and brass knuckles on the other. A feisty bunch to come up against, although as we know, they were eventually subdued, although at no small cost, which is one of the reasons why German Fallschirmjaeger were no longer used in drops after that. 

Expeditionary Force British Assault Section - Pacific War

This is the first of what will be 5 sets of British Infantry for the Pacific War. They are mostly wearing MKIII helmets, aka 'turtle helmets' -although one of them is also wearing a beret- and are equipped with a variety of weapons, including their beloved Bren gun, a Sten gun and a couple of Thompson submachineguns. All the figures also come with a standard backpack. Being an assault section, they are all on the move or firing, and as an acknowledgement to the tropical weather, they have all rolled up their sleeves. In fact I am a bit surprised that none of them are wearing short pants, but maybe it was better this way to fend of the mosquitos. 

Expeditionary Force British Defense Section - Pacific War

These guys represent a defense section, and therefore, their poses are better suited for a static position, with a nice mix of kneeling and standing men. You even get a grenade thrower. They are equipped with MkII 'Brodie' Helmets with netting added to them, which smooths their shape a bit. As with the previous set, you also get a man with a beret, and another one with an officer cap. The standout figure of the lot is the kneeling Bren gunner firing behind the tree stump. One thing to be aware of with this set is that they all come with backpacks as well, except for the officer. This means however that you want to make sure that you glue the officer's head on the body without the hole in the back. Just in case you were contemplating gluing the officer's head on a different pose. I suppose you could always fill the hole in the back with putty if you really wanted to mix and match the heads and bodies.

Expeditionary Force British Machine Gun Section - Pacific War

This is the third set of British Infantry for the Pacific Theater of Operations. They are wearing the Bridie style helmet, but as opposed to the Defense Section, they are doing so without the netting, which gives these helmets a flatter appearance. The set consists to 2 MG teams firing a water cooled Vickers heavy Machine Gun. Each team consists of a gunner, an ammo loader and a third man directing fire. Additionally, there are three support troops. As is the case with all Expeditionary Force sets, you can swap bodies and arms, so if you wanted to, every man on the MG teams could be kneeling, and all the support troops can be made to stand. I chose to mix it up a bit.

Expeditionary Force British HQ Section - Pacific War - Part I

These British HQ guys came with berets as headgear. I am thinking that this allows them to be painted as commandos or even Paras. In terms of their weaponry, this set also came with a heavy MG, which I assume was meant as an alternative for the piat pose, but I decided to give it to one of the standing guys. This means that I will need to find some wall or something else to lean him against, but I really like how it turned out. Note also that I have him a head without any cover and I glued a helmet at his base. He must have lost it in the heat of the moment!

Expeditionary Force British HQ Section - Pacific War - Part II

The rest of the HQ section, with the 3 standard poses (mortar, radio, and piat) and a couple of supporting guys. Note that here I have turned one of the kneeling guys into the NCO which is directing the movement of the guys behind him. In the case of the Australians, I glued those arms to a standing figure. 

Expeditionary Force British Mortar Section - Pacific War - Part I

The British mortar crews come with two options for headgear. You can give them turtle helmets as I did for this first crew, or berets as you will see below - and with the NCO coordinating fire in this picture. Again, I have tried to mix up the loaders and ammo handlers so that there's some variety on who is standing vs crouching and which side of the mortar they are standing on. 

Expeditionary Force British Mortar Section - Pacific War - Part II

Here I have made the loader kneel, and instead of dropping the shell into the mortar he is performing some adjustments before firing the shell. This crew also got the officer to direct the operation. 

Expeditionary Force British Mortar Section - Pacific War - Part III

This last crew got issued berets, which means that I could use them as a crew for Paras, who don't have a lot of heavy weapons options. I also assigned them the radio man, who happens to be a bit distracted and reaching for his rifle, perhaps because he saw something threatening on his flank?

Expeditionary Force Scottish Mortar Section - Pacific War - Part I

This set is a bit different because while they are part of the Pacific series, the fact that they are Scottish troops opens up the possibility of using them as B8A guys in North Africa or the ETO. Which is a good option given the few heavy weapons available from other vendors for that service branch. 

Expeditionary Force Scottish Mortar Section - Pacific War - Part II

It is quite nice how just the bonnet makes these guys look significantly different from the other mortar crews in the series. BTW, one small mistake I made was to place the container for the piat's rounds next to the mortar, thinking that it was meant to contain mortar shells. 

Expeditionary Force Scottish Mortar Section - Pacific War - Part III

In this set I decided to give turn the NCO into more of a fighting figure. Not only did he get a Sten gun which he is using to cover his men, but he also got a highlander's cap instead of the bonnet, which by the way, includes some pretty cool ribbons hanging from the back. Just a little extra touch to make him stand out.

Mars British Commonwealth Troops

This release from Mars portrays British Commonwealth Troops, which I guess means that you could use them as any number of nationalities. I know many collectors would like to use them as Canadian. What's nice about them is that a couple of them are wearing a leather vest, which I gather is called a jerkin. Another nice touch is that among their poses they have a prone piat firing team. As far as I recall, only 21C had made a prone piat firing paratrooper, but it did not have a loader. The set is pretty good overall, with almost all figures in good action, fighting poses. My only disappointment is the figure on the left, which I find very poorly sculpted. Like several other Mars figures, his arms are tucked next to his body as if he were trying to hold something with his arm pits. He actually looks worse when you look at him directly from the front. I really wish by now Mars had figured out how to properly sculpt arms in more natural positions.

Speira Miniatures British Support Troops - Part I

A good set to have to enhance the Airfix British Support Troops, or to use instead of them if you don't like to mix scales, as I got these in Big 1/32. I particularly like the flamethrower guy with its round fuel tank. I don't know if I have seen this pose before among British troops. An interesting detail about the MG figures is that one you add the base to the ammo handler, his hands no longer line up with the ammo belt (not visible in the picture). And if you place the ammo box on top of the base, then the ammo belt no longer lines up with the MG. I suppose one way to fix this is to add a base to the MG figure. 

Speira Miniatures British Support Troops - Part II

The rest of the set includes a mortar team with a spotter as well as a prone sniper. In terms of the detail, I like that some of the helmets have webbing and some don't, but I still feel that the uniforms are very 'clean'. They have a few folds, but they still appear too smooth for my taste. One more thing to note about 3D printed figures is that sometimes they design the weapons to be a bit thicker to account for the brittleness of the resin used for printing. You can see that here with the mortar. That would be a heavy one to carry! These figures were also designed by Kozak Miniatures.

Click here to take a look at WWII Toy Soldiers by Country

Click here to take a look at WWII Vehicles by Country

Click here to see more British Commonwealth Troops

Click here to see the British Infantry in action against the Waffen SS.

Click here to see a post about a special British guy

Introducing the Polish Infantry

Latest edit: Added Speira AA MG Team

______________

The Polish army leading up to WWII was not very well prepared for the upcoming conflict. It numbered about 1 million men, had about two hundred tanks, three times as many tankettes, and about 800 planes of all types. While Poland did anticipate that war with Germany was likely, they assumed they had more time to modernize and strengthen their military, particularly their armor and air forces. As war drew nearer in 1939, defense plans were drafted, but even those were too optimistic, assuming that Poland would be able to defend itself for several months, thus buying time to mobilize more troops and allow France and England to open up a second front against Germany. This defensive plan also called for defending right along the border, where the terrain was less favorable, as well as defending the 'Polish Corridor' which connected Poland to the Baltic Sea, with about a third of their troops. This was not very wise, because the Polish Corridor neighbored Germany to the west and German East Prussia to the east, and therefore could be cut off if attacked from both sides at its base. Polish armor was also thinly spread out as infantry support, instead of concentrated as dedicated armored units. As it turned out, when war broke out on September 1, 1939, the German attack proved too fast for the Polish. The Germans deployed their Blitzkrieg doctrine for the first time. This consisted of fast, enveloping armor attacks, supported by strong air tactical support, mostly provided by Stuka dive bombers and followed up by infantry units that would mop up or capture the remaining encircled defenders. In the first week of the war, despite some local successes, the surviving Polish army units quickly fell back towards Warsaw, and during the second week, the withdrawal continued towards Romania where the Polish command thought the could mount a more effective defense. Additional Polish troops which were being mobilized were ineffective, and many of them became casualties while headed to the front as their transports were bombed from the air. Unfortunately, by September 17, the Soviet Union attacked the Polish rearguard from the east, rendering the defensive plan moot. Poland, as a nation, never surrendered and fighting continued through October 6, when the last Polish forces were defeated. France and England did declare war on Germany on September 3rd, but no forces were deployed on time to help Poland in any way. At the end of the conflict, close to 875,000 Polish soldiers had become casualties or POWs. 66,000 of them were killed in action. About 120,000 men did escape into neutral Romania and eventually found their way to fight with the Allies. Comparatively, the Germans had 59,000 casualties, of which a bit over 17,000 were killed in action and they also lost about 10% of their attacking tanks and aircraft. The fact that the campaign only lasted 6 weeks, had somehow made me think that this was not a very costly conflict, but the casualty figures say otherwise. As far as toy soldiers, perhaps due to the brevity of the conflict, there had not been any Polish infantry figures made in 1/32 scale. After many years of waiting, that changed recently, when Speira Miniatures released a set of 10 3D printed figures. Let's take a look!

Speira Miniatures Polish Infantry - Part I

This is a nice bit of innovation from Speira. Both in the sense that they have released a set that has not been made before, and also that they released it as a set. All other figures you have to order individually. These guys however, can be ordered as a set of 10 figures (or you can also buy them individually), but I did enjoy the convenience of just ordering all 10 of them at once, instead of having to go through the selection/ordering process 10 times for each guy. As far as the figures go, they are all really good, except for the grenade thrower. I don't know why sculptors have such a hard time finding the right stance for these guys. I also ordered this set in Big 1/32.

Speira Miniatures Polish Infantry - Part II

These other five guys are really solid. Great combat potential. And their sculpting/level of detail is also pretty good. The MG team is certainly the cornerstone of the set. But the other guys don't come short of it. For instance, the guy on the right charging forward while firing his weapon at waist height is also very engaging. Look at his facial expression. He really looks like a bad ass sergeant. One thing to point out about these figures is that most of them are carrying around their backpack, which is something that I find a bit odd when going into combat. But it gives them a nice 1939 feeling. Overall, a great set to have!

Speira Miniatures Polish Infantry - Part III

Here are a few more guys that I found to enhance the squad. The MG being used as an anti aircraft gun is a unique and interesting touch. I do find the man feeding the ammo to be a bit too relaxed considering the fact that they are under air attack. You'd think that he'd be crouching a little at least. If you are not interested in depicting an AA scenario, the MG team could also be used for ground combat, if they were firing at some other ground units coming downhill or taking cover in the upper floors of a building. One thing to note is that the MG and the man firing it appear to be a single figure, but mine came as two separate items that I have to line up together as one. The joint is where the trigger hand meets the gun barrel. I don't know if it broke or they were split on purpose to avoid the possibility of a worse break. The officer doing the spotting fits well with them or could also be used in a regular infantry scene. The prone man turned out to be very similar to the other guy I had already bought with the original 10 man squad, except for the fact that he is looking to the side instead of aiming, and the feet are in a slightly different position. But given that there aren't that many poses available for Polish infantry, I'll take him. 

Click here to take a look at WWII Toy Soldiers by Country

Click here to take a look at WWII Vehicles by Country

Kozak Miniatures - Toy Soldiers

Kozak Miniatures was founded by Eugenio Chernov, a Ukrainian sculptor, a couple of years ago. Back then it was called Kozak Mini Art Studios. It operates entirely digitally, meaning that its sculptures are digital blueprints that come to life via 3D printing. It does not have its own retail outlet, but rather licenses its designs to different vendors which take care of the printing and all the other commercial and logistics aspects. I first ran into them at the Speira site and since then I have encountered Kozak's designs at WW23D.com and Toy Soldier Central. They have a Facebook page where they showcase their work and they also have links to a couple other outfits that take care of selling and printing their figures. Kozak is quite prolific and its range is fairly large at this point. Given that I am writing about them, they certainly offer WW2 figures, but they also offer quite a few Napoleonics, French Colonials, Pirates, Native Americans, Samurais, Ninjas, Modern Ukranian, SWAT Teams, and more. Some of them come with artillery pieces, horses, camels, vehicles, rafts, etc. And because they are 3D printed they can be scaled up or down to different sizes and can be printed with different variations of head gear. Many of the figures can be purchased individually, but recently some vendors have started to offer them as sets. I personally prefer this latter option because I find it hard to keep track of what figures I have already purchased if I buy them individually given the rate at which new designs are being offered. Below is a sampling of some of the designs that they offer in the WW2 range, along with where I have purchased them. 

Kozak Miniatures British Long Range Desert Group by WW23D

For me, this was the most interesting set at WW23D because I did not have any other figures representing this service branch. As you can tell these guys look rugged from spending a lot of time in the desert in long range patrols. They are dressed accordingly with short trousers, turbans and have not had a shave in a while. The range of weapons represented is good, although with strong preference for submachine guns. The sculpting is OK in the sense that there's not a lot of fine detail, and also the poses are standing a bit too straight for my taste. Nonetheless, given that this is the first set of British desert scouts that I incorporate into my army, I am quite happy with them. 

Kozak Miniatures British Long Range Desert Group Jeep by WW23D

Aside from the foot soldiers, this vendor also offers a couple of vehicles to enable them to go on their missions deep behind enemy lines. One of them is this jeep. It is also 3D printed and comes with a driver and a copilot operating a dual machine gun. You also get a couple of guys that you can throw in the back. Note in this picture also that one of them is wearing a beret. That's because this maker also prints these figures with different head gear. I ordered them with turbans, but the owner was nice enough to throw in a few extras and this is one of the additional guys I got. 

Kozak Miniatures British Long Range Desert Group Truck by WW23D - Part I

This truck is a bit larger and can fit 4 or 5 guys in the back in addition to the driver and copilot. The copilot is operating a dual machine gun. The man standing in the back is also handling a dual MG, so these guys are well armed with a 360 degree field of fire, and they can also shoot upwards to defend against strafing planes! The vehicle appears to be a Chevy 30CWT 1 1/2 ton truck and it is reasonable well built for a 3D printed vehicle. What I like the most is that it does not have the layering pattern that some 3D printers create. 

Kozak Miniatures British Long Range Desert Group Truck by WW23D - Part II

This is the same Chevy truck from a different angle. Note that despite this being an American-made truck, the driver is sitting on the right side of the cabin, as is the case in Britain. Not that it would matter much while driving off road in the North African desert, but I suppose when they were back at base, driving among other fellow country men, it was safer to keep to the familiar norms. 

Kozak Miniatures British Commandos by WW23D

Here are a few more guys to complement the Airfix and Matchbox commandos. I have the same commentary about their stance (a bit too straight) as I have about all the figures from this manufacturer, so I am not going to dwell on it, but at least there are three kneeling guys and one of the men -second from left- does seem to have some nice forward momentum. The squad comes with a good mix of light infantry weapons, including a sniper rifle, adequate for their clandestine missions and of course, they are wearing the distinctive commando cap. 

Kozak Miniatures British Paratroops by WW23D - Part I

These men look ready to join their comrades in Arnhem. There are nine of them so I decided to split them into two groups for the pictures so that you can see them better. From this first group, my favorite one is the one on the left, kneeling on one leg and leaning forward while firing his sub MG. The one on the right reminds me of the pose from one of the Conte British paras. And the other 3 just seem to be walking on patrol on their way to liberate some Dutch town before the Germans counter attack and turn on the heat on them. 

Kozak Miniatures British Paratroops by WW23D - Part II

These guys are a bit more adequate for a battle scene. The two guys in the middle are very similar to each other, except that they have the opposite foot forward and one of them is flexing his back knee a bit. The other difference is the type of sub MG. One of them has a sten gun with the magazine on the side, while the other one doesn't. The guy on the left is a pretty standard pose, and the one on the right reminds me of a pose I have seen in another set, but I can't quite place him. Let me know in the comments if he also rings a bell. 

Kozak Miniatures British Paratroops Set 2 by Speira

This is their second set of British Paras. I did not get the first one because they are very similar to the 3D printed guys I already bought from WW23D.com. But even this set does have a couple duplicates relative to the one from WW23D. Given the amount of 3D printed figures I've decided that I will have to be a bit selective in terms of which ones I get. Anyhow, I got set 2 because of its special weapons. The heavy MG and the Piat can always come in handy for an airborne unit which is usually light in heavier weapons. The other 5 guys are OK. I also liked that I could order them wearing helmets instead of berets (you can also order them with those). In terms of detail, I like that you can even see mustaches on a couple of guys. It probably helps that I also ordered them in Big 1/32 scale. 

Kozak Miniatures German Afrika Korps by WW23D

The British SAS guys need an opponent, so here we have the German Afrika Korps, although compared to the number of poses that came with the SAS set, these guys are going to face a tough fight. The most distinctive feature of these guys is that they are all wearing googles on their helmets. Their poses are not too exciting, except for the guy on the left, who is displaying a bit more action. Good thing that we have other manufacturers to fill in the ranks and give us more diversity of poses. 

Kozak Miniatures German Paratroops by WW23D

I like this set a bit more than the others in terms of the sculpting and the level of action in the poses. Even the guys who are standing -except for the one on the middle- are all leaning in some direction. The pose I like the most in this set is the one on the left, who is advancing while firing his sub MG. These guys will blend well with the Airfix, Mars, and Pegasus German paras. The only thing to criticize is that the 3D printing sometimes crates a few defects, like the edge on one of the helmets is a bit uneven. I suppose we will attribute that to battle damage. 

Kozak Miniatures Soviet Scouts by WW23D

This is a service branch not often represented so I was glad to see them as I do need more poses to complement the Bassevich and Plastic Platoon scouts. As you can see, they are wearing their distinctive cammo smock that I will be painting with the amoeba pattern. I also like that they gave us a pose who is sneaking in with a knife on his hand to take out an opponent undetected and preserve the surprise factor of the mission. One thing I didn't like however is a more visible manufacturing flaw on the leg of the man who is kneeling and looking through his binoculars. I may plant a bush in front of it to make it less obvious.

Kozak Miniatures Soviet Naval Infantry by WW23D

What attracted me the most about these Soviet Naval infantry guys is the fact that they are wearing helmets. Most of the other figures I have representing this service branch are wearing sailor caps. I actually prefer that look, but I like that these guys will create some variety in my ranks. Ready for defending Sevastopol or as reinforcements for Stalingrad.

Kozak Miniatures US Paratroops by WW23D

The uniforms on these guys are probably the most detailed across all the sets I got from this vendor. They did a good job with all the pockets, the equipment straps, the bandages on the helmets, etc. The only detail missing is that on the faces, but that is true for all their sets. They will go quite well with the Airfix guys. My only wish is that they hadn't made the two poses on the left so similar to each other. With only six figures in the set, it would be good to try something different. 

Kozak Miniatures US Paratroops TS Central - Part I

A nice set of 14 US paras to expand my ranks even if 5 of them seem to be repeated from the WW23D set. The scale is pretty much spot on 1/32 so they will complement the previous set and the Airfix guys quite well. In addition to the figures, you also get a couple of steel obstacles (Czech Hedgehogs) and a sandbag position to protect your guys. The detail on the poses is crisp and the uniforms have a good amount of gear. My only wish is that the poses were a bit more dynamic. I still feel that most of the poses are too 'vertical' even though they are firing, allegedly under enemy fire, but they are either standing or walking. I suspect that this is a design choice because the figures are not guaranteed to be printed with a base, so this makes it easier to get them to stand, but I would prefer if they were to impose a base on their figures if that allowed them to be more fluid in their movements. Of the seven guys in this first picture, the kneeling guy is my favorite, precisely because he is not standing. The prone guy is second. 

Kozak Miniatures US Paratroops TS Central - Part II

These guys are a bit better. Most of them are marching and their stance seems adequate for it. The guy on the far left who is about to throw a grenade is the exception. He seems too relaxed to be holding something about to blow up in his hand. But at least we have one guy running in this batch. That's progress. As far as the material in which they are printed, I found it pretty good. Better than some of the other more brittle resins. Speaking of breaking, an unfortunate thing that happened is that the sandbags appear to have been broken and glued back together. That left a white line of glue residue. Of course, that is something to do with the vendor and not Kozak and once I paint them it won't be noticeable.

Kozak Miniatures British 8th Army by TS Central - Part I

Here we have an 18-figure set of B8A guys. In terms of poses, this is really generous. I might be wrong, but I don't recall another set as big as this one since the Conte GIs were released about 20 years back. Anyhow, when it comes to 3D printing, given the volume of figures available, I am realizing that I may not be able to pursue completeness anymore. However I do want to have at least one set of 3D printed figures for each service branch and I still had that gap for the B8A. BTW, I really like that they have packaged all these figures as a set because it is pretty hard to track and buy them individually. In terms of these first 6 guys, not much to comment other than getting two poses of what's essentially the same officer figure just with different head gear seems like a missed opportunity to have crafted some better pose, but with an 18-figure set I guess they can afford that luxury.

Kozak Miniatures British 8th Army TS Central - Part II

In terms of the actual figures, I find them just OK. As I've pointed out with other Kozak figures, I find the posing of these guys a bit too stiff. I would prefer to see more bending of the knees, hunching of the back, ducking to avoid projectiles and flying debris, or running faster to find cover. These guys lack a sense of urgency, even the ones who are 'running'. Out of the first two pics, I think the Bickers machine gunner is probably my favorite. Perhaps because he is the one who requires the least intensity to appear to be doing his job well. I do have to say that the variety of weapons is welcome. Having said that, it would have been nice to issue a weapon to the grenade man on the left, perhaps slung across his back? Else he's going to need a lot more grenades! 

Kozak Miniatures British 8th Army TS Central - Part III

This is where the set gets better. The kneeling guys and the prone guys are definitely much better than their standing counter parts. One of the prone guys is firing a Bren gun and the other one seems to be firing a Boys anti tank rifle, aka 'elephant gun', which is a nice choice of weapon. The two kneeling guys in the middle look very similar, but they have different webbing/pouches, and one has a scope on his rifle so that he can snipe better at those DAK guys. One interesting bit is that the bases are not designed by Kozak, but rather provided by the vendor. In this case, they issue circular bases, and if you pay attention you will notice that some of them have a larger diameter than others. You get to glue them yourself, so I allocated the larger ones to the kneeling guys. 

Kozak Miniatures British Support Troops by Speira - Part I

A good set to have to enhance the Airfix British Support Troops, or to use instead of them if you don't like to mix scales, as I got these in Big 1/32. I particularly like the flamethrower guy with its round fuel tank. I don't know if I have seen this pose before among British troops. An interesting detail about the MG figures is that one you add the base to the ammo handler, his hands no longer line up with the ammo belt (not visible in the picture). And if you place the ammo box on top of the base, then the ammo belt no longer lines up with the MG. I suppose one way to fix this is to add a base to the MG figure. 

Kozak Miniatures British Support Troops by Speira - Part II

The rest of the set includes a mortar team with a spotter as well as a prone sniper. In terms of the detail, I like that some of the helmets have webbing and some don't, but I still feel that the uniforms are very 'clean'. They have a few folds, but they still appear too smooth for my taste. One more thing to note about 3D printed figures is that sometimes they design the weapons to be a bit thicker to account for the brittleness of the resin used for printing. You can see that here with the mortar. That would be a heavy one to carry!

Click here to check out US Toy Soldiers

Click here to check out British Toy Soldiers

Click here to check out Soviet Toy Soldiers

Click here to check out German Toy Soldiers

Click here to check out Japanese Toy Soldiers

Click here to check out US Vehicles

Click here to check out British Vehicles

Click here to check out Soviet Vehicles

Click here to check out German Vehicles

Click here to check out Japanese Vehicles

Click here to check out other Recent and New Makers

Click here to check out other Makers from the 70s and 80s

Click here to check out other Old Vintage Makers