Introducing the Japanese Infantry

Latest edit: Speira Miniatures Japanese Infantry

______________

The Japanese Imperial Army was one of the toughest in WWII. Not only did they often fight to the last man, but they also showed little mercy towards their adversaries. They also endured terrible conditions in the field, often stranded on isolated islands without food or medicine. It is said that two thirds of their deaths were the result of starvation and disease. Their sense of honor led them to fight with extreme determination and to obey what were often suicide orders, rather than allow themselves to be captured. In terms of availability of figures, this is a country that has received a good amount of attention, as you can see from the pictures below. 

21st Century Toys Japanese Infantry

This was one of the last figure sets produced by 21st Century Toys. They came already factory-painted. The sculpting, the poses and the painting are all among their best. The only thing that seems a bit odd to me is that several of them seem to be looking up rather than forwards. But overall, this is a very nice set, ready to be deployed into action.

Airfix Japanese Infantry - Part 1

A typical Airfix set. Well proportioned and well posed figures. The paint job came off a bit lighter than I would have liked. I will probably touch them up when I paint the other sets with a darker and slightly greener color.

Airfix Japanese Infantry - Part 2

The only complaint I have about the Airfix figures is about the kneeling guy. Without a base it is very easy for him to get knocked over. On the other hand I like the prone guy with the MG. The flaps behind his cap give him a nice touch for the tropical settings where he is supposed to be placed.

Atlantic Japanese Infantry - Part 1

As is often the case, Atlantic offers a mixed set of figures. Some of them, like the guy on the left, are in a bit of an awkward pose. The guy feeding the ammunition to the MG is also a bit stiff. Some of the other figures are better thought out and at least they are well proportioned.

Atlantic Japanese Infantry - Part 2

Some of these guys are good to deploy them as part of a raiding party or a Banzai charge.

Atlantic Japanese Infantry - Part 3

The guy with the branches is an interesting idea, but I think the execution fell short of its potential. If the guy is wearing camouflage, then he probably does not want to be seen. So why is he standing upright?

BMC Japanese Infantry - Part 1

BMC is a producer of relatively inexpensive figures, however I was very pleasantly surprised with their Iwo Jima figures, both the Japanese and the Marines. They are very well made. Superior to their price point.

BMC Japanese Infantry - Part 2

The figures are a bit on the larger side for 54 mm, but still a very good set. Can't wait to see how they look once they are painted.

First Gear Japanese Infantry

Recent recasts of the old Britains Deetail figures. They come with round bases and brown uniforms. I actually like the new color scheme better than the original.

Britains Deetail Japanese Infantry

The original figures. I have a hard time deciding which ones I like better. These or the First Gear recasts. The uniform colors are too light and green compared to the real ones, however their age holds some special appeal.

Britains Deetail Japanese Infantry - Recoilless Rifle

Part of their special Combat Weapons series. Not sure if the Japanese Army actually had this weapon in the field, but nonetheless it makes a good addition to the army and provides some welcome firepower if you are wargaming with these figures.

CTS Japanese Infantry - Part 1

Classic Toy Soldiers came out with 6 poses of Japanese Infantry. They are slightly on the larger side for 54mm. My favorite poses are the two guys working the machine gun.

CTS Japanese Infantry - Part 2

These other three guys, have very long rifles which are hard to keep straight and they are standing too straight for my taste.

Hing Fat (ESCI Clones) Japanese Infantry - Part 1

These guys came with the 'Big Bucket of Fun' from Hing Fat. It took a bit of research to figure out that they were clones of the original ESCI figures. They are supposed to be 54mm tall, but they are more like 50mm.

Hing Fat (ESCI Clones) Japanese Infantry - Part 2

Some of these poses are not my favorites, like the guy standing in the middle. He would really look out of place in a battlefield. ESCI produced 15 figures, at least that's what I counted on their 1/72 set, but Hing Fat only cloned 9 of them.

Hing Fat (Airfix Clones) Japanese Infantry - Part 3

To complete the set of 15, Hing Fat cloned the 6 Airfix figures which actually resemble very much the 6 poses that they left out from ESCI, but look better than the ESCI equivalents.

Glencoe (Marx Recasts) Japanese Infantry - Part 1

Now, here are some of the most dynamic poses in the WWII plastic figure world. A bit on the slim side, but fully action-packed. Definitely Banzai material!

Glencoe (Marx Recasts) Japanese Infantry - Part 2

Other than the prisoner guy, who would be a very rare case, these are also a very dynamic bunch.

SWTS (Recasts of Marx 6"" figures) Japanese Infantry

These are supposed to be reproductions of the 6" Marx figures in 54mm. I bought them advertised as SWTS (Steve Weston Toy Soldiers) but I have never been able to verify if that is the real vendor who made them. In any case, you can see that they have a very close resemblance to the Glencoe/Marx figures, which makes sense given their common origin.

MPC Japanese Infantry - Part 1

MPC figures tend to be tall and slim, and their poses a bit stiff, however I have a soft spot for old figures like these, and I trust that once they are painted, their appearance will improve.

MPC Japanese Infantry - Part 2

The guy without a base tends to fall over, and the rifle strap belonging to the second guy from the left is often broken when you find these figures. The same goes for the tripod on the machine gun. So if you find these guys without broken weapons grab them!

TSSD Japanese Infantry - Part 1

Toy Soldiers of San Diego came out with these figures relatively recently -a couple of years ago- and they did a very nice job with the sculpting and the poses. They actually have 8 poses only, but the guy with the flag can also hold a rifle instead - see below. 

TSSD Japanese Infantry - Part 2

The rest of the pack. As you can see, they also project a good dose of action and energy. The fixed bayonets very much in line with their tendency to engage in close quarters combat.

Oliver 60mm Japanese Infantry - Part 1

I had never heard about these figures until one day that I was browsing through eBay. They offer 11 good poses to complement your Imperial Army. Certainly they are a bit larger, but they should still fit in. I also saw them listed in a brown color.

Oliver 60mm Japanese Infantry - Part 2

The only thing I did not like about them is that they seem to be unofficial recasts (i.e. clones). If you pay attention to the base of some of the figures you will see how the base of the original figure is contained within a larger base which indicates that a second mold was made using an original cast. If the molds are lost, I suppose that is a good solution. What I didn't quite like was that the eBay listing did not point that out, and on close inspection, the figures have other imperfections typical of clones.

DGN Japanese Infantry - Part I

This set seems to be a fairly unique set in the sense that only a few of the figures seem to be influenced by prior sets -Airfix in this case. A few of the other poses have a very vague resemblance to the ESCI guys, but it is questionable. The rest of the poses seem to be originals. The man on the right for instance is a sniper which will be a good addition to my Japanese army since I do not have any so far. 

DGN Japanese Infantry - Part II

The size of the figures is also a bit on the shorter side, but considering that the Japanese were also smaller, this does not seem to be an issue. Here we have a couple of Airfix look-alikes. 

DGN Japanese Infantry - Part III

Another two more Airfix-like figures, and two originals. I just wish these guys were displaying a bit more action. I am not a big fan of guy who are just standing around.

Lido Japanese Infantry - Part I

Here are 4 of the six poses that I am aware of. These guys are really hard to find and if you do find them, they can be quite expensive. I got lucky with them, but I only found 4 of the poses. The sculpting and the detail are OK. Not the best, but decent enough. I am debating whether to paint them or not...

Lido Japanese Infantry - Part II

Here is one more pose. It is interesting that the shape of his helmet resembles that of a German soldier. Not sure what to make of that. He might be better suited to serve as a Chinese officer. The only one missing at this point is a man firing his rifle while advancing.

Lido Japanese Infantry - Part III

I think these are the last two poses. Unfortunately both of them are a bit broken. The man on the left is just missing the tip of the rifle. The officer on the right is missing a hand in which he was holding his binoculars. I'll probably end up painting them in which case I will try to repair them as the fix will be less noticeable. Even in this state, I was happy to run into them, as they are very hard to find and also got them at a great price compared to what they regularly sell for in better condition. 

Trojan Japanese Infantry

You don't often see this set and when you see it, it is often quite pricey, so I felt lucky when I was able to score one recently. I should say that I had only seen them in pictures, so it was a bit of a shock when I got them and realized that they are actually quite undersized for 1/32. At best they are 1/35, but they really feel small compared to the rest of my collection. The poses are decent and I suspect that I am missing a couple more. Unfortunately, the man on the left has the rifle tip broken off. I am sure that helped bring down the price. I'll see if I can repair it. The factory paint is still in fairly good condition. All in all, I see them more as a rare collectible worth having for the sake of completeness, than as figures I would want to mix in with the rest of my troops.

Unknown Japanese Infantry

This is a 60 mm figure. It came with a lot that I bought from the UK, so I suspect the manufacturer might be British. I can't recognize the base and sculpting, and I have not found it in my reference book or online. If you happen to know who made him, please leave a comment. I only got this pose, so it would also be good to know how many and what other poses exist. Overall, it is a decent figure in terms of detail, even if it is not the most exciting pose. As far as I can tell, that is the original paint still on it. 

Starlux 60mm Swiss Officer - painted as Japanese

This is a figure I ran into by chance, but picked up without hesitation. It was advertised as a Japanese officer, but one of our fellow collectors confirmed that it is a Swiss officer. I suspected that might be the case based on the shape of the helmet. In any case, it will be placed at the front of the column of Japanese troops which I am in the process of painting. The uniform is a bit darker than I'd like so I might need to give him a bit of a touch up. It looks like the prior owner already did touched up the paint a bit, so I am not too bothered by the thought of modifying the original. Anyhow, as you can see, it is a nicely made figure. The rider can be removed from the horse. The pose could have used a bit more action, but even like this, I find it a nice addition to the collection. The reality most likely is that officers did not ride their horses into battle, but rather used them for transportation, as shown in the picture.

Mars Imperial Japanese Infantry

This is a a set that has been made before plenty of times. But at least you can tell that the Mars sculpting team is getting more adventurous in terms of adding dynamism to its poses, and they have given us two charging men. That is offset however, by the man who is throwing (or holding?) a grenade. If he is meant to throw it, I hope his squad has time to hit the ground because that's going to land a bit short! Other than that, this set is not that remarkable, considering that there's already a good variety of Japanese Infantry poses in the market from prior manufacturers. 

Expeditionary Force Japanese Infantry - Part I

A nice set from Expeditionary Force in what nowadays is being referred to as Big 1/32 scale. Meaning, more compatible with TSSD than Airfix. As is EF style, their figures are produced as a set of bodies to which you can attach different heads and arms/weapons. Each set comes with 9 figures and 6 base body types. In this post, I have created 18 different figures from 2 sets, but you can certainly create more/different poses. The level of detail is very nice, and the quality of the plastic is also good. Robust so that you don't have a lot of bent tips, but not hard. And it is also easy to glue. In this first picture I have 3 different bodies. Unfortunately, some of the bodies have very similar stances, you have to watch the feet very carefully to tell them apart, which makes me wish they had made them more different so that we could see the variety more easily.

Expeditionary Force Japanese Infantry - Part II

The next body type is a man advancing with his right foot forward. Note that by giving them different weapons they already look quite different. On top of that you can attach a head with or without the flaps hanging on the back of the helmet, and you can also tilt them slightly to give the body language a different expression.

Expeditionary Force Japanese Infantry - Part III

This next base body is stepping forward with the left foot, and leaning forward slightly more than the men in the next picture. And not seen here, there's also some differences in the pouches attached to the back of the belt. One thing to note about the figure with the flag is that the flag does not come attached to the rifle. Therefore, you need to attach the flag to a man who is holding the rifle horizontally. I almost glued it to a man who was carrying the rifle across his chest, but then realized that gravity would make the flag hang differently. Same thing with the tassel on the officer's sword from the first picture. You need to watch how it hangs, or else be ready to cut it off and reattach it at the right angle. 

Expeditionary Force Japanese Infantry - Part IV

Another base body stepping forward with the left foot, but these guys also have the back foot pointed forward, more than the men in the previous picture. So as you can see, some of these base bodies are pretty hard to tell apart. It would have been better to make one less base body stepping forward with the left foot, and add a crouching or kneeling pose. But even with so many similar base bodies, the variety of arms and weapons, makes it possible to avoid having two figures turn out exactly the same. You just have to plan things out well before you start gluing them so that you don't end up making a clone by mistake. 

Expeditionary Force Japanese Infantry Machine Gun section - Part I

This MG set can be purchased with one or two MGs. You still get 9 figures, which means that if you only ask for 1 MG, then you will get 7 additional infantry men. Since I already had 2 sets of regular infantry, I opted for the two MGs. What's interesting in this set, aside from the obvious nice addition of the MG teams, is that the officer comes with the option of looking through binoculars. You also get a new head type, wearing a bandana around the head with the rising sun design on it, like the one that the kamikaze pilots used to wear. I gave it to one of the MG men who is likely making a final stand at his position. And you also get a couple of ammo boxes to round up the scene. 

Expeditionary Force Japanese Infantry Machine Gun section - Part II

What was a pleasant surprise with this set is that it also comes with a couple of extra options for the arms/weapons. Apparently these had been intended for the original set, but ended up being a bit late and got released with this set instead. So with this set you can look forward to being able to assemble a grenade thrower, and also a man firing a submachine gun. As you can see I opted to 'sacrifice' the second MG ammo handler and instead armed him with the submachine gun, which turned out nicely. Lastly, note that in this set, we also got a new body type: the kneeling guy on the background. I chose to arm him with a rifle in the aiming position. All in all a nice add on to the original set.

Expeditionary Force Japanese Infantry Mortar Team

This set forces you to make some interesting choices. You have the option of assembling 3 mortar teams. 2 of the figures -the kneeling ammo handler, and the standing ammo handler- could be assembled in the same position, but that would make the set a bit dull. In order to introduce some variety I assembled one set the intended way. For the second team, I gave the standing ammo handler, the arms of the kneeling ammo handler, which requires him to stand on the opposite side of the mortar, and I also turned the kneeling handler into a sub machine gunner. For the third team, I gave the kneeling handler the arms of the standing handler, and also turned the standing ammo handler into a grenade thrower. On top of that you get a commander, and two other standing figures that you can give a variety of weapons, from the ones included in the set, or from any extras that you might have from the previous sets. You also get a few options of headgear in the set which provide some additional variety. This set also came with a wall section, but I used it for the picture below.

Expeditionary Force Japanese Infantry - Jungle Defense Set

What makes this a jungle set is the helmets and cammo worn by the sniper figure, all covered in leaves. I am pretty sure the sniper is going to look really cool once it is painted. The highlight of this set is the 20mm anti-tank rifle team -note that there's also an ammo handler/loader. This 2-man team can be nicely emplaced behind the wall, which BTW is made of dirt on the outside, and lined with wooden planks on the inside. There is also a light mortar in the set, which offer a good contrast with the heavier mortars in the previous set. The rest of the figures are average poses. You will need to get a bit creative to find ways of making them look sufficiently different, given the similarity in the base bodies -I wasn't too thrilled that all of them are kneeling, but I guess that's why they are a 'defense' set. Once they are mixed together with the figures from the previous sets, this will all be less noticeable. 

Plastic Platoon Japanese Infantry

This is Plastic Platoon's first set (along with the US Marines) outside of the Eastern Front, and even though we already have a nice range of Japanese Infantry released by previous manufacturers, it is definitely a welcome set, given the exquisite level of detail and sculpting typically delivered by their figures. Take for instance, the writing on the flag attached to one of the rifles. I can't read Japanese, but it feels like it's real! But even beyond the little details and the action-packed sculpting, these poses are also nicely diverse, covering a good range of weapons, headgear, and equipment. The only thing that I noticed which seemed a bit odd to me is that the flag that we just mentioned would be 'floating' upwards. As fast as that man is running, I have a hard time imagining that the flag would defy gravity that much. But let's not get picky. It is still an amazing set that should be charging at the US forces trying to take their island!

Plastic Platoon Japanese Infantry Heavy Weapons - Part I

This is an exciting set for a couple reasons. The first one is simply that there are not that many Japanese artillery crews or artillery pieces out there. The Deetail recoilless rifle comes to mind, but that's it as far as I remember. And then there's the fact that the figures and the gun are so well sculpted and detailed. I believe this gun is a Type 92, 70 mm howitzer. The gun comes in several pieces which can be easily attached together. Glue seems to be optional. In terms of the figures, my favorite one is the man operating the sight and elevation lever.  The fact that he is straddling the gun gives it a nice touch. The officer and the loader complement the crew very nicely. 

Plastic Platoon Japanese Infantry Heavy Weapons - Part II

This MG crew is part of the same heavy weapons set. The MG is a separate sculpture itself and the man firing it can be seated on the base separately. The ammo feeder lines up just right to be able to feed the belt into the MG. This is thanks to a notch in the bases. As you can see, the whole set is rich in detail. From the bullet holes in the sandbags to the Japanese writing on the side of the ammo box. or the hobnails on the boots. The facial features on the men are also extremely well done. The only thing that is less than ideal on this set is the amount of flash on the figures. It is quite a bit and it is also hard to remove. You can still see some left on the leg of the ammo handler. Other than that. this set is a great addition to my Japanese troops.

Speira Miniatures Japanese Infantry - Part I

This is a decent batch of figures. I like that they are overall pretty dynamic in their poses. The grenade man could be leaning back of forward a bit more and the wounded man, could also be falling back more, but other than that, the sculpting is pretty good and the level of detail is also good. For example, the chin straps for the helmets are two pieces tied at the chin, as was the case in real life. You can also see the star on the front of the helmets. 

Speira Miniatures Japanese Infantry - Part II

In this other batch, the squad is ready to launch a Banzai charge. One thing to point out is that I ordered these figures in Big 1/32 scale, made to match TSSD, Conte, etc. That made a positive difference, primarily for the weapons. In prior sets that I ordered in traditional 1/32 some of the tips were broken, but not this time. That small increase in size and thickness makes the figures substantially sturdier. A few of these guys are carrying backpacks and a few of them are wearing a cap, instead of a helmet. That gives the group a bit of variety. 

Click here to take a look at WWII Toy Soldiers by Country

Click here to take a look at WWII Vehicles by Country

Click here to check out more Japanese Troops

Click here to see a very cool post of Japanese troops in action against US Marines.

Here you can see a more detailed description of the Atlantic Japanese guy with the cammo

Click here to see a post about the Marines

Click here to see a post about clones and recasts

Introducing the Polish Infantry

The Polish army leading up to WWII was not very well prepared for the upcoming conflict. It numbered about 1 million men, had about two hundred tanks, three times as many tankettes, and about 800 planes of all types. While Poland did anticipate that war with Germany was likely, they assumed they had more time to modernize and strengthen their military, particularly their armor and air forces. As war drew nearer in 1939, defense plans were drafted, but even those were too optimistic, assuming that Poland would be able to defend itself for several months, thus buying time to mobilize more troops and allow France and England to open up a second front against Germany. This defensive plan also called for defending right along the border, where the terrain was less favorable, as well as defending the 'Polish Corridor' which connected Poland to the Baltic Sea, with about a third of their troops. This was not very wise, because the Polish Corridor neighbored Germany to the west and German East Prussia to the east, and therefore could be cut off if attacked from both sides at its base. Polish armor was also thinly spread out as infantry support, instead of concentrated as dedicated armored units. As it turned out, when war broke out on September 1, 1939, the German attack proved too fast for the Polish. The Germans deployed their Blitzkrieg doctrine for the first time. This consisted of fast, enveloping armor attacks, supported by strong air tactical support, mostly provided by Stuka dive bombers and followed up by infantry units that would mop up or capture the remaining encircled defenders. In the first week of the war, despite some local successes, the surviving Polish army units quickly fell back towards Warsaw, and during the second week, the withdrawal continued towards Romania where the Polish command thought the could mount a more effective defense. Additional Polish troops which were being mobilized were ineffective, and many of them became casualties while headed to the front as their transports were bombed from the air. Unfortunately, by September 17, the Soviet Union attacked the Polish rearguard from the east, rendering the defensive plan moot. Poland, as a nation, never surrendered and fighting continued through October 6, when the last Polish forces were defeated. France and England did declare war on Germany on September 3rd, but no forces were deployed on time to help Poland in any way. At the end of the conflict, close to 875,000 Polish soldiers had become casualties or POWs. 66,000 of them were killed in action. About 120,000 men did escape into neutral Romania and eventually found their way to fight with the Allies. Comparatively, the Germans had 59,000 casualties, of which a bit over 17,000 were killed in action and they also lost about 10% of their attacking tanks and aircraft. The fact that the campaign only lasted 6 weeks, had somehow made me think that this was not a very costly conflict, but the casualty figures say otherwise. As far as toy soldiers, perhaps due to the brevity of the conflict, there had not been any Polish infantry figures made in 1/32 scale. After many years of waiting, that changed recently, when Speira Miniatures released a set of 10 3D printed figures. Let's take a look!

Speira Miniatures Polish Infantry - Part I

This is a nice bit of innovation from Speira. Both in the sense that they have released a set that has not been made before, and also that they released it as a set. All other figures you have to order individually. These guys however, can be ordered as a set of 10 figures (or you can also buy them individually), but I did enjoy the convenience of just ordering all 10 of them at once, instead of having to go through the selection/ordering process 10 times for each guy. As far as the figures go, they are all really good, except for the grenade thrower. I don't know why sculptors have such a hard time finding the right stance for these guys. I also ordered this set in Big 1/32.

Speira Miniatures Polish Infantry - Part II

These other five guys are really solid. Great combat potential. And their sculpting/level of detail is also pretty good. The MG team is certainly the cornerstone of the set. But the other guys don't come short of it. For instance, the guy on the right charging forward while firing his weapon at waist height is also very engaging. Look at his facial expression. He really looks like a bad ass sergeant. One thing to point out about these figures is that most of them are carrying around their backpack, which is something that I find a bit odd when going into combat. But it gives them a nice 1939 feeling. Overall, a great set to have! 

Click here to take a look at WWII Toy Soldiers by Country

Click here to take a look at WWII Vehicles by Country

Speira Miniatures - Toy Soldiers

Latest Update: Additional German Winter Infantry, Polish Infantry, and Japanese Infantry

__________________

Speira Miniatures is a Swedish firm started by Amos Ingblom -a historian and fellow hobbyist- and two other friends, Helen and Christian, around 2018 -at least that's when their Facebook page begins. Speira Miniatures is special because their figures are 3D printed. The printing process turns liquid resin into solid material. What began for them as a hobby with the aim of creating more figures to extend their collection evolved into a business. Because their figures are printed off digital designs, that means that they can print them in a wide range of scales, from 1/72 all the way to 1/6 (!) and they can do a series of customizations such as including or excluding the base, mirroring the pose along the vertical axis, etc. Another advantage that this business model offers is that you can pick and chose which figures to include in your set and how many poses of each, which is something I really like. Their range of periods includes Medieval, Fantasy, American Civil War, Napoleonic/French Revolution, Ancients, Pre-historic, Civilians, etc. On the WW2 range so far they offer US GIs, and German Infantry, but they seem to be adding quickly to their catalogue. At the time of this writing, they already offer 78 different WW2 figures, fairly evenly distributed across Germans and US GIs. The quality of the figures is fairly good, with very few imperfections. The bases have a bit of extra material underneath that may need to be sanded away, but that's about it. The material is hard which means that weapons do not bend, but some tips or hands/fingers might break, but are easy to glue back together. What's a bit sad about this firm is that Amos passed away at the end of 2019, at the young age of 40. His two partners have carried on with the business, and from what I can tell they have done a very good job so far. I just purchased my first set from them this past Christmas, and their customer service was great, ensuring that my package got to me on time to become my wife's present to me. Ok then, let's see what some of their figures look like. 

Speira Miniatures German Infantry - Part I

Given that I like my figures to be in action/fighting poses, the figures I selected do not include any guys standing guard or just walking. This first set are guys running into battle. Note that the range of weapons represented is quite nice. I really like the guy carrying the panzerschreck rockets on his back, and also the guy carrying the panzerschreck itself. One thing I should have noticed is that most of these guys seem to be running with the right foot forward. I should have taken advantage of the ability to mirror the figures to get some more stepping forward with the left foot. Also interesting is the guy who seems to have just taken a bullet and is crumpling down. Not a big fan of casualty poses given their limited use, but this one can still be part of a charging unit, which is why I ordered it.

Speira Miniatures German Infantry - Part II

Here's another batch of men advancing. Only one guy is running forward -again, leading with the right foot. The rest are being a bit more cautious. I should also add that once these figures are painted, they look really nice. I have not painted any myself, but a FB buddy -Emil- has and the color brings out a lot of the details that otherwise fades a bit in the plain resin finish. Speira mentioned that even just priming them will do a lot to bring out the details. 

Speira Miniatures German Infantry - Part III

This batch is mostly firing from a standing position, plus the ammo handler for the panzerschreck. One thing that caught me a bit by surprise is that the machine gunner seems to be firing at a low angle. I suppose he could be used on top of a Normandy beach bluff, firing down on the D-Day landings, or on the second level of a Berlin building trying to hold back the Soviets. In general I prefer my firing poses to shoot at the same level that they stand as that is less limiting, but we'll find a good firing location for this guy. 

Speira Miniatures German Infantry - Part IV

This last batch are my crouching poses. Good for defensive actions, where it's better to take cover and/or make yourself a smaller target. I find the grenade thrower a bit interesting. Most grenade men, are usually in the throwing position, but it makes sense that before throwing, they ought to spend some time contemplating what would be the most effective way to throw it, or simply waiting for a gap in the opposing fire to make their move. There are two other poses that I like here because they are not fully kneeling. I can see how these guys might be switching between standing/firing and crouching, or maybe they simply want to maintain a small profile while they fire on the go. All in all, a very nice batch of figures.

Speira Miniatures German Infantry - Part V

A few more German Infantry figures to supplement the platoon. Most notable here are the mortar team and the rifle grenade man. The prone machine gunner is also handy, although a pose that is easier to come by in other sets. And then there's the guy advancing with the MG at the waist. That one is a more unique pose. 

Speira Miniatures German Infantry - Part VI

And a few more heavy weapons. The MG team just needs some sandbags or a short wall to make it all work well together. The rest of the squad is ready to lend some support to their flame thrower buddy as he sets off on his mission. What's interesting about this batch is that all of them are wearing late war puttees, except for the flamethrower guy who is wearing some very nice leather boots. 

Speira Miniatures US Infantry - Part I

These are 3D printed figures from a relatively new firm in Sweden. You can order individual figures, which is great because you can get more or fewer of each pose. I did not order every single pose they offer. I mainly ordered fighting poses. In this first batch you can see mostly men charging/moving forward. The selection of weapons is nice, and I particularly like the two flamethrower guys. The level of detail (frame, tanks, hoses) is impressive for 3D printing. The sculpting is also well done. The figures are well proportioned and the stance/balance of the figures seems just right. BTW, if you notice some dust on the figures, that is something I did not notice before I took the pictures. It came from something else I was sanding on my workbench. So nothing to do with the material or manufacturing process of these guys. 

Speira Miniatures US Infantry - Part II

In this other batch, I am showing crouching men, and casualties. The crouching poses are fine. A few of them are quite similar and you do have to pay attention to notice the differences, in the ammo pouches, weapons, etc. One thing that you can do when you order the figures is to 'mirror' them so that the left side is printed on the right side. I should have probably done that to make some of these poses look a bit more different from each other. The other kneeling pose is a man pulling out a grenade's safety pin, unlike most other grenade men, who are usually throwing it. Then we have the casualties... I must admit that I am a bit underwhelmed by them. The sculpting seems a bit stiff. For someone who just got hit, I think they lack a bit of drama. I think that just the force of the bullet would knock the person more off balance. 

Speira Miniatures US Infantry - Part III

This batch are standing, firing poses. Even though they are fighting poses, I have to say that -with the exception of the flamethrower guy- they have substantially less action in them. The sculpting is still good with regards to the proportions, level of detail, equipment and weapons, but they are just not as exciting as the first batch for instance. But they provide good enough variety to round up the set well.

Speira Miniatures US Infantry - Part IV

A few more GIs to round up the squads. A mortar team is always a welcome addition. There's also a medic rushing forward to help the wounded. He displays well his sense of urgency. And there's also the man on the right which offers an interesting perspective. He does not come across as the most courageous pose, but it somehow feels real that he is just trying to take cover.

Speira Miniatures Soviet Infantry

Here's one more Soviet infantry man. He is supposed to be standing up, running forward to throw his grenade, but he does not have a base to stand on. In due time I might glue him to one, but for now, I think he works equally well crawling forward. He just needs a bit of support on the back to keep him from rolling over.

Speira Miniatures Soviet Naval Infantry

Speira does not have many of these Soviet Naval Infantry figures, so when I saw this guy I grabbed him. What's interesting about him is that you can also select the head that you want for him. There are three or four variations, with different headgear and facial expressions. He will go well with my other Soviet Naval Infantry guys from Pegasus, etc. 

Speira Miniatures Japanese Infantry - Part I

This is a decent batch of figures. I like that they are overall pretty dynamic in their poses. The grenade man could be leaning back of forward a bit more and the wounded man, could also be falling back more, but other than that, the sculpting is pretty good and the level of detail is also good. For example, the chin straps for the helmets are two pieces tied at the chin, as was the case in real life. You can also see the star on the front of the helmets. 

Speira Miniatures Japanese Infantry - Part II

In this other batch, the squad is ready to launch a Banzai charge. One thing to point out is that I ordered these figures in Big 1/32 scale, made to match TSSD, Conte, etc. That made a positive difference, primarily for the weapons. In prior sets that I ordered in traditional 1/32 some of the tips were broken, but not this time. That small increase in size and thickness makes the figures substantially sturdier. A few of these guys are carrying backpacks and a few of them are wearing a cap, instead of a helmet. That gives the group a bit of variety. 

Speira Miniatures German Winter Infantry - Part I

I got these guys mostly because of their outfits. I like how they are all bundled up for the cold weather of the eastern front (or maybe they are part of the Ardennes offensive?). I also like how there a some guys who are taller/shorter than the others, as it happens in real life. But I wasn't thrilled about the fact that most of them are simply walking or standing around. Other than the poses, the sculpting is fairly nice, well proportioned, with good level of detail -look at those folds in the clothing, the scarves around their heads, and the leather of the boots. These guys are also in Big 1/32 scale, which makes them feel pretty solid.

Speira Miniatures German Winter Infantry - Part II

The mix of weaponry across the 10 figures is also adequate. There are a couple of heavy MGs, 3 subMGs, one officer with a pistol, and three rifle men. And then you also have a bit of variety in the head gear, with couple of them wearing caps instead of helmets, or some of them wearing the cap under their hood of their jacket, and many of them wearing heavy mittens - I guess you had to take those off to be able to pull the trigger. The best pose of them all is the guy on the far right who is charging forward while getting ready to fire his subMG. 

Speira Miniatures Polish Infantry - Part I

This is a nice bit of innovation from Speira. Both in the sense that they have released a set that has not been made before, and also that they released it as a set. All other figures you have to order individually. These guys however, can be ordered as a set of 10 figures (or you can also buy them individually), but I did enjoy the convenience of just ordering all 10 of them at once, instead of having to go through the selection/ordering process 10 times for each guy. As far as the figures go, they are all really good, except for the grenade thrower. I don't know why sculptors have such a hard time finding the right stance for these guys. I also ordered this set in Big 1/32.

Speira Miniatures Polish Infantry - Part II

These other five guys are really solid. Great combat potential. And their sculpting/level of detail is also pretty good. The MG team is certainly the cornerstone of the set. But the other guys don't come short of it. For instance, the guy on the right charging forward while firing his weapon at waist height is also very engaging. Look at his facial expression. He really looks like a bad ass sergeant. One thing to point out about these figures is that most of them are carrying around their backpack, which is something that I find a bit odd when going into combat. But it gives them a nice 1939 feeling. Overall, a great set to have! 

Click here to check out US Toy Soldiers

Click here to check out British Toy Soldiers

Click here to check out Soviet Toy Soldiers

Click here to check out German Toy Soldiers

Click here to check out Japanese Toy Soldiers

Click here to check out US Vehicles

Click here to check out British Vehicles

Click here to check out Soviet Vehicles

Click here to check out German Vehicles

Click here to check out Japanese Vehicles

Click here to check out other Recent and New Makers

Click here to check out other Makers from the 70s and 80s

Click here to check out other Old Vintage Makers