Introducing the Frogmen

Combat swimmers and combat divers have been a part of military operations for centuries. Swimmers aid themselves with breathing devices such as snorkels -hollow bone or grass in antiquity-, while divers make use of more advanced technology, such as rebreathers or scuba tanks. The difference between a rebreather and a scuba system is that the rebreather does not release any air, and instead filters our the CO2 and replenishes the oxygen in a closed circuit. The scuba system does release air and is therefore easier to detect. Modern frogmen date back to a couple years before WWII, when Italy formed the Decima Flottiglia MAS aka Xª MAS (i.e. Tenth Assault Boat Fleet). This was a commando type unit of seamen who would conduct raids using speed boats as well as manned torpedoes to infiltrate port facilities. A submarine or larger surface ship would bring the unit within operational range and offload the attackers and their vehicles. The speed boats would be aimed at the enemy ships and the crew would jump into the water shortly before impact. The manned torpedoes were used as transport to get next to the ships, where explosive charges could be attached. The swimming part came later, when trying to make the escape. If they did manage to escape, the return trip home usually involved a lengthy journey ove land. This were risky missions and in a large number of them, the divers were either captured or killed, with the missions succeeding about only half of the times. However, the disproportionate damage that they inflicted on the allied Navies justified the risks and the cost. Most of the Italian divers operated in the Mediterranean theater, although some of the speedboats were used by the Germans in the Sevastopol area. All other major participants in WWII followed the lead of the Italians and developed equivalent units during the course of the war. After Italy joined the allies, the Italian frogmen helped the British improve their Frogmen units, while the members of the Xª MAS  who remained with the Germans were used primarily on land operations. As far as underwater combat is concerned, until a decade or two ago, combat divers were mainly equipped with a knife and it was not really common to deploy other divers against incoming frogmen. Use of nets and other defensive measures were simpler and more effective to implement. Only recently have weapons been developed which are capable of firing short metal rods accurately and with enough range to make them practical to use underwater at a safe distance from the enemy. In terms of model figures there not too many, but enough to staff a small commando unit and carry out a few raids. Let's take a look. 

Atlantic Frogmen - Part I

A rather unique set by Atlantic. I am not sure what country they actually represent. Given the manufacturer there's a good chance that they are Italian. Since I don't have the manned torpedo which came with the set, I have placed all three of these frogmen on a raft getting ready to dive, however the two on the left are actually supposed to be riding on top of a torpedo. Hard to tell if these guys are wearing rebreathers or scuba gear. 

Atlantic Frogmen - Part II

The rest of the set are 4 divers with different tools and equipment used during their missions. What is quite interesting is that each of them is mounted on top of a base representing a variety of sea plants or corals. This allows them to 'float' as if they were really diving. A nice sculpting touch that allows the figures to be placed 'off the ground' when playing with them.

Atlantic Frogmen - Part III

So I managed to find the missing torpedo. And in doing so I also discovered that these figures were also made in this bright orange color. Not my favorite so it will be a great candidate to get painted. From pictures that I've seen, the torpedo seems to be a bit on the shorter side, compared to the real ones, but it is good enough to illustrate the point of how the divers 'rode' into their missions. Interestingly enough, this other set had the torpedo, but was missing the raft. I wonder if the sets came with either one or the other...

Lone Star Frogmen - Part I

A nice and interesting set from Lone Star. I don't know what country they represent exactly, and whether they are meant to be WWII or post war figures. As was the case with Lone Star, they were on the generous side in terms of the number of poses in the set. I don't know however if I got them all already.

Lone Star Frogmen - Part II

Unlike the Atlantic divers, these guys don't have any bases to keep them 'off the ground', so they must lie flat on their bellies on the sea floor when diving!

Lone Star Frogmen - Part III

As you might suspect from all the different colors, these actual figures are not originals. They are clones of relatively decent quality. Once they are painted it won't be that noticeable.

Lone Star Frogmen - Part IV

 I believe the original frogmen from Lone Star came with factory paint as did their other sets. Interestingly enough, the paint scheme that I have seen shows them wearing only a bathing suit, instead of a full diving suit. If so, I guess these guys would have to be used in the Mediterranean only! I am planning on giving them a full body suit when I paint them...

Ideal Manned-Torpedo Launcher with Divers - Part I

I just found this set while looking for some diver figures. It represents a boat carried a manned torpedo and a diving team. It was supposedly manufactured by Ideal, although I have yet to verify the claim. Still it is a nice little set to give the other divers figures in my army a bit of support. In terms of the nationality that is represented, it is not clear to me, although we could probably designate them as Italians as they were the most active in WWII in this type of operations. 

Ideal Manned-Torpedo Launcher with Divers - Part II

This is the skipper. Note that the figures have a hole in the base which allows them to be attached to the boat. This is a nice feature if you actually deploy your boat in real water, which will keep the figures from falling over. 

Ideal Manned-Torpedo Launcher with Divers - Part III

One of the divers about to jump in. 

Ideal Manned-Torpedo Launcher with Divers - Part IV

The other diver taking in the view.

Ideal Manned-Torpedo Launcher with Divers - Part V

This is the only figure which is actually diving. I made him 'hold on' to the side of the boat to get a better angle for the shot. 

Ideal Manned-Torpedo Launcher with Divers - Part VI

The manned torpedo deployed in the water, with its diver riding it into action. The lever on the front of the torpedo is actually a crank which turns and twists a rubber band which makes the propeller turn when it is released. Nice mechanism, which again shows that this set was really meant to be deployed in water. 

Ideal Manned-Torpedo Launcher with Divers - Part VII

Manned-torpedo rider from the back.

Ideal Manned-Torpedo Launcher with Divers - Part VIII

This shot shows the ramp from which the manned-torpedo can be launched. 

Unknown Frogmen - Part I

Here are a few more diver poses. I don't really know who made them. They are from a set made in China, clearly clones of some other earlier figures, and they probably represent more modern divers, given their equipment. The man in the left for instance is holding and underwater camera. 

Unknown Frogmen - Part II

I like these two poses because unlike most of the other diver figures that I have found, these guys are not moving horizontally, but rather floating in an upright position as one would do when observing the surroundings or when getting ready for some underwater hand to hand combat.

Unknown Frogmen - Part III

The two poses on the left seem to be copies of two guys already listed in the Lone Star section. The man on the right must be from that same set, as his diving gear looks just the same. This BTW, makes me wonder if I have all the figures listed under the Lone Star section properly identified, as I just realized that the tanks on some of those figures are smaller...

Britains Deetail British manned torpedo- Part I

This is an interesting find. Not sure if it is post WWII or not. The Italian military developed and used manned torpedoes similar to this one during WWII. There were usually employed on Special Operations missions against enemy port facilities. 

Britains Deetail British manned torpedo - Part II

Here is a view from the other side. Going on these missions was very dangerous. Getting into an enemy port and close to enemy ships undetected was difficult enough. Getting our and making it back to friendly territory was even more challenging. 

 Timpo manned torpedo
Not sure what nationality they represent. These type of vehicles were mainly used by the Italians during WWII, but it's possible that they also represent British divers, after all, Timpo was a British firm. A decent set. The torpedo is made of a pretty light plastic, and it is hollow, which makes it feel even lighter. The oxygen tanks are removable, but the rest of the figures is one piece. The colors are not painted, but is the plastic's original color, which suggests that this was an item made in their later years. 

Click here to take a look at WWII Toy Soldiers by Country

Click here to take a look at WWII Vehicles by Country

Click here to see other Lone Star figures

Click here to see other Atlantic figures

US Amphibious Vehicles

The fleet of amphibious vehicles assembled by the US during the war was a key element that enabled it to reclaim the occupied territories back from the axis powers. While large troop transports and ships could bring men and materiel across the world, and aircraft carriers could help control the seas and harass the enemy on land and sea, it was these vehicles that enabled them to travel that last short distance to the shore so that the infantry could occupy the land. Having enough of these vessels, also enabled the allies to land troops en masse, which was critical to be able to take and hold a beach head. Over 1000 of them were employed at the battle of Okinawa for instance. After the initial landings, they were also important to ferry supplies in, and carry out the wounded. One noticeable design trade off for these vehicles is that in order to be able to get close to the beaches, they had to be light, which meant that they could not be heavily armored or have a cover on top. Their light weight also made them very susceptible to the effects of a rough sea. It must have been a very long ride and a very tense experience to have to make it ashore on one of these vehicles under fire in a rough sea. In terms of scale models, there are not too many which come already assembled. The ones that I have found are made by BMC and MPC and are borderline between toys and models. Let's check them out. 

BMC LCVP aka Higgins landing craft - Part I

The Landing Craft Vehicle, Personnel was a key vehicle used by the allies to land troops and supplies during their amphibious operations in North Africa, Normandy, Italy, as well as the Pacific theater. It was designed by Andrew Higgins and its original purpose was to navigate the Louisiana swamps. It was made out of plywood, which made it quite vulnerable to enemy fire. Later models added a metal ramp which afforded some protection to the men. It was equipped with two machine guns in the back which provided a bit of support. It could carry 36 men or 8000 pounds. The ramp was wide enough that it could also fit a jeep, in which case, only 12 additional men could be transported. It was operated by a crew of 4, and its speed was about 12 knots. Over 20,000 of them were built.

BMC LCVP aka Higgins landing craft - Part II

Here is a view of the MPC LCVP loaded with a few Conte GIs to provide a sense of the scale. It does not quite fit the 36 men that it could carry in real life. Its actual length was 36ft (11m). The sides are also a bit shorter than they would have been in reality.

BMC LCVP aka Higgins landing craft - Part III

A vew from the back. The machine guns are not included in this model. I have seen some customizations of this model in which a couple of matchbox GIs machine gunners have been cut at the waist and added to the boat. They do the trick quite well. 

BMC LCVP aka Higgins landing craft - Part IV

Here is my attempt at customizing the BMC landing craft. I was inspired by a fellow collector and conversion expert Scott Schleh. He pioneered the use of the Matchbox machine gunners as the crew for the landing craft. It does require cutting them at the waist, crafting a gun shield for them and attaching them to the craft. Once they are painted and in place, they do look like they belong there. 

BMC LVT aka Amtrak 

The LVT -Landing Vehicle Tracked- was an amphibious vehicle which could be used both in water and land to deliver supplies as well as to provide combat support for the infantry. It was designed by Donald Roebling. Initial versions were not well armored, but subsequent models included upgraded armor and weaponry. Some even carried 75mm guns with which they could blast at enemy targets even before reaching the beaches. Their open gun turrets however made them vulnerable to shrapnel and small arms fire. As far as mobility, their tracks gave them an advantage over the Higgins boats, as they could move over sandbars and reefs. The LVT could carry up to 4500 pounds or 18 fully equipped men. Over 18600 of them were built during the war and they saw action not only in the Pacific, at engagements such as Tarawa and Iwo Jima, but also in northern Europe and Italy. 

MPC DUKW

The DUKW, informally referred to as 'Duck', was built on top of the GMC CCKW 2.5 ton truck described above, which meant that it was also manufactured by General Motors. It was used to move troops and cargo over land and water. It was particularly useful for landing operations, playing an important role in the Pacific, the Mediterranean, and the Normandy landings among other amphibious operations. Weighing 6.5 tons, it could move at a speed of 50 mph on land and 6.3 mph on water. Over 21,000 of them were built. This model was produced by MPC. It comes unpainted and it's not that well detailed. For instance, some Ducks had a ring-mounted MG. This one comes with three MGs, and no ring-mount. It does have a driver and it also comes with a winch in the back and a hook, to which you can attach a string. This vehicle was probably meant initially as a toy, but given the fact that it is the only DUKW that comes assembled it has become relatively popular. Like other MPC vehicles, once it is painted it will probably look fairly decent.

Click here to check out other US Vehicles

Click here to see a really cool post of an amphibious landing

Click here to see a post about the Normandy Landing Beaches

Click here to see a post about the Marines

BUM - Toy Soldiers

Barcelona Universal Models, also known as BUM is a Spanish firm offering toy soldiers in 1/32 and 1/72 scale. Most of their figures seem to be recasts of figures originally issued by other firms, or adaptations of them. They do offer a few unique sets, mainly related to the Spanish Civil war. Most of the products that they offer are in the 1/72 line, with the 1/32 sets being in a distant second place. Also, from what I've read, the quality control when it comes to packaging is not very good. You don't always get the contents that are depicted on the box. In my case out of a set which was supposed to have 2 machine gun teams, I got one machine gunner and 3 ammo feeders, which makes one of the MG teams useless. As far as WWII, they do have a handful of allegedly US heavy weapons and artillery sets. I recently got the two heavy weapons sets. Let's take a look.

BUM US Infantry - Part I

This is machine gun team is sold as American by BUM. The art on the box shows them wearing GI uniforms, however when you look at the actual figures I don't really recognize the features of the American uniforms. So I actually plan on using them as Italian Infantry, since they could use a bit of help when it comes to heavy weapons. The poses are actually OK, but the level of detail on the figures, is not so great. For instance, the face of the man on the left is pretty plain.

BUM US Infantry - Part II

Another heavy weapons team from BUM. Also allegedly American, but note really. This set also comes with the barbed wire, but I did not include it in the picture to get a better shot. Note also that the figures seem to be clones. You can tell not only because the level of detail is a bit faded, but also because the original oval bases are now encased in larger rectangular bases. 

Click here to check out US Toy Soldiers

Click here to check out British Toy Soldiers

Click here to check out Soviet Toy Soldiers

Click here to check out German Toy Soldiers

Click here to check out Japanese Toy Soldiers

Click here to check out US Vehicles

Click here to check out British Vehicles

Click here to check out Soviet Vehicles

Click here to check out German Vehicles

Click here to check out Japanese Vehicles

Click here to check out other Recent and New Makers

Click here to check out other Makers from the 70s and 80s

Click here to check out other Old Vintage Makers

Click here to see a post about the US Infantry

Click here to see a post about the Italian Infantry

Click here to see a post about Mortars

Speedwell - Toy Soldiers

Speedwell was a British toy soldier firm. From what I can gather, it seems to have been around in the 70s and 80s, but it was not a major player in the industry. Many of its figures are clones of the Britains Herald modern British Infantry figures, also recast by UNA. They also seem to have made at least one set of their own, which is the one that is depicted in the pictures below. Their figures are not so easy to come by, particularly their original set. Luckily I managed to get my hands on one of them. Let's take a look. 

Speedwell German Infantry - Part I

These are not quite 54mm. They are at the most 50mm in size. They are very rare and therefore a bit pricey. At the same time, the sculpting is nothing extraordinary. The poses are a bit stiff and the level of detail is not quite there. Also in terms of the color scheme that they came painted in, it is also a bit unusual. Perhaps they could be used as Afrika Korps troopers.  

Speedwell German Infantry - Part II

Here are a few more poses. As per one of the comments below, I am still missing one additional pose: an officer with a moveable arm holding binoculars. Note that these guys have different head gear. The man on the right seems to be wearing a paratrooper helmet. Again, the poses are a bit stiff. From what I know, the figures were released on both sand and brown/green, as shown in this picture.

Speedwell Afrika Korps - Part I

Here are the same figures in a desert setting, more appropriate to their uniform.

 Speedwell Afrika Korps - Part II

The rest of the guys. You can be the judge of where they fit better.

Speedwell Afrika Korps - Part III

Here is the man at the far right of the prior picture, this time in the AK color scheme. I think I like him better like this. 

Speedwell Afrika Korps - Part IV

And here is the commander. Unfortunately, missing an arm. You can tell that it was not resting at the waist as there is no hand left behind, but based on the rest of the body, it could not have been doing something very exciting. Or maybe he was doing the nazi salute and that's why someone chopped it off? 

Click here to check out US Toy Soldiers

Click here to check out British Toy Soldiers

Click here to check out Soviet Toy Soldiers

Click here to check out German Toy Soldiers

Click here to check out Japanese Toy Soldiers

Click here to check out US Vehicles

Click here to check out British Vehicles

Click here to check out Soviet Vehicles

Click here to check out German Vehicles

Click here to check out Japanese Vehicles

Click here to check out other Recent and New Makers

Click here to check out other Makers from the 70s and 80s

Click here to check out other Old Vintage Makers

Click here to see a post about the German Infantry

Click here to see a post about the German Afrika Korps

Blue Box - Toy Soldiers

Blue Box is a firm based out of Hong Kong. Apparently they have been around for about 50 years, however not much is known about them in terms of production. Today they manufacture many different types of toys. In terms of toy soldiers it seems that earlier they made several WWII plastic sets, and today they make die cast figures in metal such as Romans, American Civil War, and of course, WWII. I ran into these guys at a local hobby shop. I bought them thinking that they were plastic, only to discover at home that they are metal. They actually have a nice, heavy feel to them so I should have known from holding the package. This series of figures is called Elite Command and they depict a general along with three infantrymen. The figures are hand painted to a decent standard, but the faces of the characters are not exactly a close match. Let's take a look. 

Blue Box Elite Command British Infantry

This  set represents General Bernard Montgomery and some of his infantrymen. Compared to other metal figures, like King and Country and so on, they are not as nice, but they are still OK. As far as the resemblance with Monty, you can be the judge of that. 

Blue Box Elite Command German Infantry

This other set represents Field Marshal Erwin Rommel and his men. The outfit that he is wearing is actually fairly well done. What I don't like so much about these figures -all sets- is that the weapons are made of plastic and glued to the figures. The result is that in some cases the weapon is resting on top of the hands, particularly the trigger hand, as opposed to being held by the figure. 

Blue Box Elite Command US Infantry

The US set represents General George Patton and a few of his GIs. Again, the resemblance of the main character is a bit questionable and the holding of the weapons is a bit odd. Otherwise, the rest of the sculpting, level of detail and paint job are all fairly decent.

 Blue Box Elite Command US Infantry Generals

These two figures were part of a larger set that contained all the other previous poses plus these two other figures. As far as I can tell, one of them seems to be Eisenhower, and the other, I assume might be Marshall?

Blue Box US Infantry

I stumbled upon this guy by accident. He came in a mixed lot of figures. His base is labeled as Blue Box from Hong Kong so I assume he was made by the same firm who made the metal figures above. I don't really know how many there were in the set. I also wonder if the fact that he comes from Hong Kong means that he is a clone, or whether he is an original. But if he is a clone, which he could be because the sculpting detail is not very sharp, I don't know what the original would have been. A bit of a mystery. But in any case, I do like the pose. It has a bit of dynamism to it, which I always welcome. I hope to someday come across more fellows from his squad. 

Click here to check out US Toy Soldiers

Click here to check out British Toy Soldiers

Click here to check out Soviet Toy Soldiers

Click here to check out German Toy Soldiers

Click here to check out Japanese Toy Soldiers

Click here to check out US Vehicles

Click here to check out British Vehicles

Click here to check out Soviet Vehicles

Click here to check out German Vehicles

Click here to check out Japanese Vehicles

Click here to check out other Recent and New Makers

Click here to check out other Makers from the 70s and 80s

Click here to check out other Old Vintage Makers

Click here to see a post about German Infantry

Click here to see a post about US Infantry

Click here to see a post about British Infantry